If you shop at Amazon.com (for anything), use this link to support MyFordFreestyle.com!

P0320, P1336, P061B

Post Reply
cdave2000
New Member
Posts: 2
Joined: Mon Nov 04, 2019 9:47 am

P0320, P1336, P061B

Post by cdave2000 » Mon Nov 04, 2019 10:02 am

HELP. My 2007 Freestyle is throwing these codes. I have replaced the throttle body, spark plugs, and MAF sensor so far.

On a trip 5 hours north of me the car just suddenly started running bad and the transmission started shifting weird. Occasionally the wrench light comes on while driving it and of course than it barely shifts going down the road. It stalls at stops and of course to get those codes the check engine light came on. If i can't figure this out myself i will have no choice but to put it in the shop, and i would rather not do that. I have reset the ECM multiple times. Every time i change a new sensor i reset the computer and drive it. I let it idle until it is at optimal running temperature to allow everything to reset. I am at wits end.

any assistance would be greatly appreciated. The only consistent code is P061B. The other codes change as i change parts. LOL.

User avatar
Africa_FS_07
Regular Member
Posts: 1658
Joined: Sat Apr 09, 2011 10:57 am
Location: Africa

Re: P0320, P1336, P061B

Post by Africa_FS_07 » Tue Nov 19, 2019 12:39 am

Have you checked your air cleaner and its box, especially to see if the air cleaner is properly seated and if it is the right one for the box?
i wonder who "Voodoo Bob of the Dead Poets Society" is hounding now.....:mrgreen:

cdave2000
New Member
Posts: 2
Joined: Mon Nov 04, 2019 9:47 am

Re: P0320, P1336, P061B - resolved

Post by cdave2000 » Thu Nov 21, 2019 10:58 am

Yes i checked everything. Come to find out the wiring to the camshaft position sensor fell and was rubbing on the CV axle. It rubbed a hole through the wiring and was causing a short. Once the wiring was fixed it went to running properly again.

Post Reply