Bullbar for the freestyle?

Post Reply
Gabeshaffer545
New Member
Posts: 2
Joined: Tue Jul 10, 2018 6:55 pm
Location: United States of America

Bullbar for the freestyle?

Post by Gabeshaffer545 » Fri Sep 28, 2018 3:24 am

I was thinking of bulking the car up but just decided to do a few things but can't find any actual aftermarket parts for said vehicle. I know what everyone is going to say "the freestyle isn't meant for that kind of thing". But that's not my concern. This is my first car so I decided to throw on a bunch of things just to make it "shnazy". The two things I can't find are running boards or bullbars/grille gaurd. If anyone can point me in the right direction without telling me to get a different car, that would be greatly appreciated :D


xvert
Regular Member
Posts: 136
Joined: Thu Aug 29, 2013 3:05 am
Location: Sibiria

Re: Bullbar for the freestyle?

Post by xvert » Sat Sep 29, 2018 12:34 am

Some years I'm trying to find time to remove the bullbar, 'footboard' and 'lifting' 1 "(I think you know why) .They are made from universal parts for tuning from stainless steel. These spare parts are many in stores. Perhaps the 'footboards' fit from volvo xc90 because they have the same wheelbase. But especially for FS, I did not meet spare parts for tuning.
IMG_20180929_141819_220.jpg
IMG_20180929_141819_220.jpg (97.89 KiB) Viewed 89 times
IMG_20180929_124836_004.jpg
IMG_20180929_124836_004.jpg (52.64 KiB) Viewed 89 times
Attachments
IMG_20180929_144406_522.jpg
IMG_20180929_144406_522.jpg (53.06 KiB) Viewed 89 times

Gabeshaffer545
New Member
Posts: 2
Joined: Tue Jul 10, 2018 6:55 pm
Location: United States of America

Re: Bullbar for the freestyle?

Post by Gabeshaffer545 » Sat Sep 29, 2018 4:25 pm

I love the look you have going! that's what I'm going for, without the lifting. I know how that works and that'd put too much pressure on everything underneath. So I'm sticking with just some cosmetic/minor protection. Do you know any universal running boards and/or bullbars that COULD potentially fit on the FS?

xvert
Regular Member
Posts: 136
Joined: Thu Aug 29, 2013 3:05 am
Location: Sibiria

Re: Bullbar for the freestyle?

Post by xvert » Tue Oct 02, 2018 2:33 am

I did not interest this theme for a long time, but it seems to me that my stores are worse than yours. I still have a photo of the crankcase protection. I did not install it because it is too heavy (16kg / 36lbs).
ford_freestyle_crankcase_shield1.jpg
ford_freestyle_crankcase_shield1.jpg (57.19 KiB) Viewed 52 times
ford_freestyle_crankcase_shield.jpg
ford_freestyle_crankcase_shield.jpg (27.93 KiB) Viewed 52 times
There would be a desire and opportunity, you can make an SUV from a roadster. I recently saw a cool video :)
https://youtu.be/97qD1KKVsi4

Post Reply