P2195 CEL

Post Reply
Mehle90
Regular Member
Posts: 13
Joined: Sun Feb 11, 2018 7:25 pm

P2195 CEL

Post by Mehle90 » Sun May 13, 2018 8:37 pm

Hello, I have been trying to figure out where this code is coming from. P2195 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 1 Sensor 1. I replaced bank 1 Sensor 1 02 sensor. I have looked all over for Vacuum Leaks, I cannot find anythting i have sprayed all the vacuum lines with TB Spray No Surges. I clear the Codes keep getting the same one. Any Ideas? I really need to figure this out super annoying lol.


User avatar
Webmaster
Site Admin
Posts: 559
Joined: Sun Oct 24, 2004 1:26 pm
Contact:

Re: P2195 CEL

Post by Webmaster » Sun May 13, 2018 9:51 pm

Did you use a Ford/Motorcraft sensor? https://www.obd-codes.com/p2195

Use a scan tool to watch the live readings of that and other sensors.

Mehle90
Regular Member
Posts: 13
Joined: Sun Feb 11, 2018 7:25 pm

Re: P2195 CEL

Post by Mehle90 » Sun May 13, 2018 9:56 pm

I had bought a sensor off of ebay, also I have a code reader not sure if it can do live readings

Mehle90
Regular Member
Posts: 13
Joined: Sun Feb 11, 2018 7:25 pm

Re: P2195 CEL

Post by Mehle90 » Sun May 13, 2018 10:04 pm

I had bought a sensor off of ebay, https://www.amazon.com/dp/B077Z7Y8FX/re ... il_1?psc=1 will that one work?

User avatar
Webmaster
Site Admin
Posts: 559
Joined: Sun Oct 24, 2004 1:26 pm
Contact:

Re: P2195 CEL

Post by Webmaster » Mon May 14, 2018 10:05 am

I don't think that will help you. Look for one with graphing capability. I recommend BlueDriver @ https://amzn.to/2wDgfwx that's my go-to scan tool. It does a LOT.

If I was you, I'd put in the correct O2 sensor from the Ford dealership. Aftermarket sensors may be inferior.

Post Reply