Wheel Sizes

[Woodsman]

Ordered a set of studded snows. Going to throw some plain steelies on. Just need help with the size.

Found these:
https://www.summitracing.com/parts/vsw- ... /overview/


Wheel Diameter:17 in.
Wheel Width (in):6.500 in.
Wheel Bolt Pattern (app):5 x 114.3mm
5 x 4 1/2 in.
Wheel Material:Steel
TPMS Sensor Compatible:Yes
TPMS Sensor Mounting Style:Valve stem mount
Primary Wheel Color:Black
Wheel Finish:Gloss
Manufacturers Wheel Series:Vision Wheel SW60 Series
Offset:+40.00mm
Backspacing (in):5.330 in.
Wheel Construction:2-piece
Beadlock Included:No
Beadlock Functional:No
Lug Nut Seat Style:Conical seat - 60 degree
Hub Centric Ring Compatible:No
Center Bore Diameter (in):2.642 in.
Center Bore Diameter (mm):67.10mm


The numbers all line up just fine, except the offset. These are +40.00mm and the car has +52.00mm. Comes out to half an inch. That should be just fine, right?

[jas88]

The smaller offset might interfere with the brakes.

[Woodsman]

The smaller offset might interfere with the brakes.

Duly noted.

I did a search on Tire Rack, and they sell rims with 40mm offset. So...I'm guessing I'll be ok?

hm

[dwighte]

Most any machine shop can make spacers for you as long as the lug bolts are long enough.
It might also have issues with clearance on turns.
Dwight

[Woodsman]

Welp, I ordered the rims. After I did, someone mentioned the fact of being hub centric. And it looks like the Freestyle is hub centric. I may have to run centric rings to fix the issue.