Page 1 of 1

Code P061B

Posted: Sun Jul 03, 2011 7:01 pm
by dbrown
Can anyone tell me what could be the problem with my car, got a P061B code from Auto Zone.

Definition: Internal control module torque calculation performance error

Explanation: The ECM has detected an internal calculation error

Probable cause: Check other service codes first

Re: Code P061B

Posted: Mon Jul 04, 2011 7:09 am
by dmckmc
This DTC will be set in combination with P2106.
Possible causes: See the possible causes for DTC 2106.
Diagnostic aids: Disregard the current DTC at thie time. Refer to the DTC charts to diagnose the DTC 2106.

P2106 - Throttle Actuator Control (TAC) System - Forced Limited Power - The TAC system is in the Failure Mode Effects Management (FMEM) mode of forced limited power. This DTC indicates the FMEM action is in effecte due to a failure in an electronic throttle control (ETC) related component or module.

Possible causes:

TAC motor open, unplugged or circuits shorted to power
MAF sensor fault
TP sensor fault
Module communications network concerns
MAP sensor fault

Were there any other DTC's found? Other DTC's could help pinpoint the problem.

Re: Code P061B

Posted: Sun Sep 23, 2018 8:32 pm
by homerdepo
Ok what is the fix for this