If you shop at Amazon.com (for anything), use this link to support MyFordFreestyle.com!

Code P061B

Post Reply
New Member
Posts: 1
Joined: Sun Jul 03, 2011 6:47 pm

Code P061B

Post by dbrown » Sun Jul 03, 2011 7:01 pm

Can anyone tell me what could be the problem with my car, got a P061B code from Auto Zone.

Definition: Internal control module torque calculation performance error

Explanation: The ECM has detected an internal calculation error

Probable cause: Check other service codes first

Regular Member
Posts: 245
Joined: Sat Jul 11, 2009 12:45 am

Re: Code P061B

Post by dmckmc » Mon Jul 04, 2011 7:09 am

This DTC will be set in combination with P2106.
Possible causes: See the possible causes for DTC 2106.
Diagnostic aids: Disregard the current DTC at thie time. Refer to the DTC charts to diagnose the DTC 2106.

P2106 - Throttle Actuator Control (TAC) System - Forced Limited Power - The TAC system is in the Failure Mode Effects Management (FMEM) mode of forced limited power. This DTC indicates the FMEM action is in effecte due to a failure in an electronic throttle control (ETC) related component or module.

Possible causes:

TAC motor open, unplugged or circuits shorted to power
MAF sensor fault
TP sensor fault
Module communications network concerns
MAP sensor fault

Were there any other DTC's found? Other DTC's could help pinpoint the problem.

Regular Member
Posts: 10
Joined: Sun Sep 16, 2018 5:06 am

Re: Code P061B

Post by homerdepo » Sun Sep 23, 2018 8:32 pm

Ok what is the fix for this

Post Reply