If you shop at Amazon.com (for anything), use this link to support MyFordFreestyle.com!

Auto Lamp Feature... Can't get it to work

Post Reply
User avatar
Truckster
Regular Member
Posts: 226
Joined: Fri Apr 08, 2005 6:18 pm

Auto Lamp Feature... Can't get it to work

Post by Truckster » Tue Apr 12, 2005 5:28 pm

Anyone been able to get the Autolamps to work? I can't

Here are the directions from the owners manual

Programmable exit delay Programmable exit delay allows the length of the autolamp exit delay to be changed.

To program the auto lamp exit time delay:

1. Start with the ignition in the LOCK position and the headlamp control in the autolamp position.

2. Turn the headlamp switch to .

3. Turn the ignition switch to RUN and then back to LOCK.

4. Turn the headlamp switch to the autolamp position. The headlamps will turn on

User avatar
AWdriven
Regular Member
Posts: 13
Joined: Fri Apr 15, 2005 12:06 pm
Location: San Marcos,CA

I got it to work

Post by AWdriven » Sat Apr 16, 2005 8:28 am

I got it to work.. One thing I found out is that you cannot delay to long doing any of the steps, except setting the delay itself... Like the ignition switch the you need to turn it from LOCK to RUN to LOCK without turning the engine over and it must be done fairly quickly. Then when you turn the light switch to AUTOLAMP the headlights should come on until you turn them off. It helps to read it thru a couple of timesbefore actually doing it, atleast it helped me... Hope this helps you out..

Post Reply