Page 1 of 1

Embarrassed- I lost a bolt. Help

Posted: Sat Dec 29, 2018 9:32 am
by Aross777
I removed the bracket to replace my transaxle roll resistor (upper motor mount) and one of the long 13mm bolts vanished. Does anybody have an extra one they would be willing to sell/send me or a link to where I can buy one of these bolts? I would be so thankful.

Re: Embarrassed- I lost a bolt. Help

Posted: Mon Dec 31, 2018 7:16 am
by DanfromSterling
Shows bolt available from Ford Dealer.....

Re: Embarrassed- I lost a bolt. Help

Posted: Mon Dec 31, 2018 9:39 am
by Aross777
Is there a site you used to look up the part number for that particular bolt?

Re: Embarrassed- I lost a bolt. Help

Posted: Mon Dec 31, 2018 12:25 pm
by rollandalfred
Here's a picture with some part numbers that may help
5eJCT97.jpg
5eJCT97.jpg (40.42 KiB) Viewed 142 times
Have you seen the following post about just replacing the isolator, and not the entire roll mount?

viewtopic.php?t=3306

Re: Embarrassed- I lost a bolt. Help

Posted: Mon Dec 31, 2018 1:03 pm
by DanfromSterling
http://ww2.justanswer.com/uploads/apjp0 ... _mount.pdf

Item 6 is bolt based on description that I assume you lost.

https://www.fordpartsgiant.com/parts/fo ... -s439.html

Appears $30.73 plus shipping.

Appears bolt not available through Ford Dealer. Part number does not come up. W710524S439 or W710524-S439 (S439 is finish code), WW710524 is bolt minus finish code).

Appears discontinued part through Ford. Freestyles are getting older and more parts will start to not be available through ford service.

Ebay listing says discounted bolt not available through service.

https://www.ebay.com/sch/i.html?_from=R ... 2&_sacat=0

If you want to paypal me shipping for a bolt I could send one your way. I have parts car can pull from. USPS Priority Mail Flat Envelop is $6.70. If $10 works for shipping, time, and paypal fees? Let me know and I can give you Paypal address after I make sure I can pull the bolt with out issue.

Other option is if you are local? I'm in White Lake, Michigan

Thanks Dan